Thursday, May 22, 2014

DIY Disable DRL Corolla 2007

This DIY is on how to disable your Daytime Running Lights for your 9th Gen Corolla .

The purpose of doing this is to install HID to your vehicle with out damaging the ballast due to low current .

1. Find black box under dash located under the steering wheel

2. Find yellow wire coming out of the DRL black box

3. Cut the wire and leave enough so you can add a butt connector

4. Gound out the yellow wire coming from the DRL black box

5. Safely protect the exposed wire with a butt connecter

6. Then you should have just disabled your DRL if everything was done correctly

MAKE SURE YOU HAVE GOOD GROUND .

THIS IS A EASY DIY ONCE YOU LOCATE THE DRL BOX.

More info and help at www.corollacarclub.proboards.com