DIY - Rear Brakes and Rotors 2000 Infiniti I30

This is a DIY for a 2000 Infiniti I30 rear brakes

 

 

First you remove the two bolts that hold the caliper to the bracket - If needed use a screw driver to take the caliper off - Then separate the pads from the rotors - Then remove the two bolts holding the bracket to the rear axle

 

 

 

When putting on new rotors make sure they match - If using slotted rotors make sure you realized there is a left and a right

 

 

Rear calipers on some cars have to be twisted back an not pushed - You will need a brake caliper tool - Match up the correct slots cause they do come in different sizes - Make sure when twisting you don't twist the rubber part it should twist easily

 

 

 

Once you finished then you out everything back the same way you took it off .

 

 

Some rear rotors have emergency brake shoes inside - In this case there are non

 

 

 

 

More DIY @ www.COROLLACARCLUB.proboards.com

 

 

 

 

 

 

 

.