This is a DIY on a 2000 Infiniti I30 on how to replace a alternator and a/c belt tensioner
First thing you do is to loosen up the belt from the top where the adjusting screw is located
Once the belt is loose then you can remove the belt then take the pulley off - from there you remove the three bolts holding the bracket
This is what it looks like apart - you must use the old brace for the tensioner
This is what it looks like before you install the belt tensioner back
You have to put this back first before you put the pulley wheel
Then adjust the belt with a new belt
Make sure the belt is properly tight so you can avoid squeaking - this belt is in the front of the power steering belt - might be a good time to change both
More DIY at www.corollacarclub.proboards.com
.
No comments:
Post a Comment