DIY Replacement JDM Rear Brake Light Assembly 2005 Corolla S

This is a DIY on how to replace your rear brake light assembly for a 2005 Toyota Corolla - Putting on Atlis Rear Brake Light Assembly

Remove the carpet that covers the bolts holding the assembly - This is a JDM Altis assembly so read the instructions carefully cause on this vehicle I had to remove a bolt from the assembly 

Now when removing the reverse light assembly there are clips you will need a needle nose pliers to squeeze then push the assembly out . 

Then you put everything back on a very simple DIY 

For More DIY www.COROLLACARCLUB.PROBOARDS.com

.