This DIY is for a universal Tanaka tow strap for the front of a Toyota Corolla without removing the front bumper .
The purpose of this is to pull lowered vehicles if something was to ever happen and you wouldn't tear up the front bumper .
Others put them on for looks , So make sure if you use it for towing you do not purchase a cheap one.
Find a location on the bumper bracket then drill a hole .
With a magnet slide the bolt to the hole you just drilled .
Now to keep the bolt from spinning find a piece of cardboard and a pair of pliers and gently hold the bolt so you do not damage the threads so while you turn the nut till it can't spin anymore .
Once you are done this is the finish product .
More DIY at www.corollacarclub,proboards,com
,
No comments:
Post a Comment